E-mail: btxianfa@gmail.com TEL:0086-317-8267555 FAX: 0086-317-8267570 MOB:0086-15131786129

 
roll forming machine Sitemaps
Our company specializes in the production of Roll Forming Machine and whole sets of automatic production lines.--C purlin roll forming machine
HB NEWS

www.rollformingmachinechn.com

　

C purlin roll forming machine

time:2011-07-27 11:26from:未知 Author:admin click:Times

Summary of the structure (1) Material supporting frame Including one set of the uncoiler back shaft core, 2 sets of frames, 2 sets of the bearings. It bears 2T. (2)


 Summary of the structure

(1) Material supporting frame
Including one set of the uncoiler back shaft core, 2 sets of frames, 2 sets of the bearings. It bears 2T.
(2)    Feeding the material into the platform cold forming machine 
Put the raw material (steel strip) on the plat to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
(3)   Steel strip unfolding systemcold roll forming
Function and features: it adopts the rollers with the diameter of 90mm to unfold the steel strip. The thickness of the unfolding steel is less than 4.0mm.  The rollers’ type is 3 rows above and 5 below.
(4)  Molding coreRoof Panel Forming Machine
In order to keep the product shape and precision, adopts welded sheet structure, motor reducer drive, chain transmission, roller surfaces polishing, hard plating, heat treatment and galvanization treatment. The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stampedcold roll forming machine 
Rolling galvanization thickness: 0.01 mm
Rolling material: Gcr15
Quench hardening rigidity: HRC 62-65
(5)   Molding fly-saw shearing mechanismRoll Forming Machine

 

It is controlled by the motor and drove by the hydraulic pressure. The molded piece with the final shape gets through this mechanism, and is pressed by the hydraulic fluid. Then it is punched and cut. The cutting mechanism adopts the fly-wheel saw (high-speed cutting steel) to cut. The advantage of the cutter mechanism lies in its high efficiency of the production and the cuts’ trimness and integrity. The fly-wheel saw can cut 200-300t
(6)    Hydraulic system
It is controlled by gear wheel oil pump. After filling the hydraulic oil into the hydraulic oil tank, the pump drives the cutter machine to begin the cutting job.
The system includes a set of hydraulic tank, a set of hydraulic oil pump, and two hydraulic pipes. And two sets of electromagnetism valves.
Power of the oil pump: 3kw
Hydraulic oil: 40#
(7)  Computer control system
It adopts MITSUBISHI PLC to control. The target piece’s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use.Wall Panel Forming Machine
Transducer: the use of it is to make the length more precise and the main machine more stable while processing.
Processing precision: within 1.00mm
It contains LCD monitor,
PLC programmer,
Transformer for the electronic machines and kits of every part.
(8) Counter
One counter gauges length, pulses, and decides length.
(9)   Molded pieces receiving frame
Usage and features: it is used for receiving the molded pieces.
 

------ line --------------------------

Your Name:

Using Right E-mail：

Content：

steel pipe,