Color Roll Forming Machinery Cutting Control System

Color-coated steel Roll forming machine automatic cutting, the use of computer-controlled cabinet note (inverter type)

1, control cabinet panel

An oil pump switch used to control pump start and stop. Running, be sure to open oil pump, hydraulic system pressure. Pump running, pay attention to the direction of oil pump, and the arrow direction to be consistent. If not, please pump motor in the three-phase power with each other a change in any two.

2, the next cut, the back button is to control the cutter operation. If the press cutting, the back button are not valid in general should consider the hydraulic tank of oil is too low, should be given no additional hydraulic oil tank. Also under the cutting knife and return process, the encounter in front of the limit switch will automatically stop running.

3, forward and backward through the transducer control host is, anti-running, its speed by the panel of high-speed / low speed switch control. In automatic speed switching operation is absolutely necessary to place high-speed office.

2, the computer screen

1, the host computer screen displayed after power-Hing Machinery Manufacturing Co., Ltd. Changzhou Asia, press any number key to enter to the main screen; the main screen display length, planning, completion, progress, run, manually, by selecting key to select to one 1, using the numeric keys can be set to the size, C, CE are cleared key, the length of the specifications for the rolled plate length unit is mm, planning is necessary to suppress the value of the quantity of the plate to complete the value is already rolling into the number, the progress in the rolling plate rolling out the length of the course, when the progress value is equal to the length of the value, the system will stop and automatically cut to complete the number of auto-plus-one.

2, a user must first set the length of the value and plan number, and then [Select] button, select the Run option, and then click [OK] button, you can automatically run.

Upon the completion of a number less than the plan to start movement, the system has been run to date between the two are equal; Upon the completion of a number greater than or equal to the number of hours planned to start running, only to roll and cut after a board automatically. Press [Reset] key to stop.

3, if it starts running, the host is not running, the display shown on the arrows, indicating less than the maximum cutter bit, take your oil pump, cutter will automatically uplink in place, the host starts running. Roll forming machine

If the master before stopping at 150 mm, there is no access to low-speed running, can not guarantee accuracy of rolled plate.

4, in a test roll, please do not open pump, so as to avoid losses due to the length of an error. Rolling the first one finished, press the reset button, and then use ruler to measure the actual length of the general case the first one rolled out the length of the user to set the length of the margin of error, the error and then use the panel to adjust the [incised] button and the [Back] button to complete the first one cut.

When the length and the actual length of a fixed bias, the user can adjust the following way: down, such as: set the length of 2000mm, the actual length is 1998mm, to set the length of 2002mm can be set so that the actual the length of the remains 2000mm.

5, in the automatic operation, For the temporary parking, according to [OK] button. At this point the system has been rolled out of suspension and the length of memory, if the re-run, can then [OK] button. mud pump  mud pump parts

If in operation by [Reset] button, has rolled out will not be long board memory, need to [progress] in a set.

6, manual option for the debugging machines to use, the user can not operate. Manual setting option content, directly related to the measurement accuracy, the user can not be amended lightly.

7, pressure transducer is automatically color-coated steel tile machine a very important component, the user is not operational. Must guard against rain.