-
-
XF40-256-768 Glazed Tile Forming Machine
Main parameter: 1. Install size: 1...
-
auto slitting machine line...
-
Roof Ridge Cap Roll Forming Machine (Xf457)
Product Description Roof Ridge Cap ...
-
XF25-183-1100 Glazed Tile Forming Machine
Product introduction This type of glazed...
-
Mechanical press routine maintenance
Mechanical press routine maintenance...
-
Metal Trapezoidal Roof Tile Roll Forming Machine (XF17/35)
Metal Trapezoidal Roof Tile Roll Forming ...
-
Trapezoidal profile roll forming machine
Trapezoidal profile roll forming machine ...
-
Rolling Machine, Cold Forming Line
Rolling Machine, Cold Forming Line ...
-
Colored Steel Cold Roll Forming Machine
Parameter: 1.Suitable to process:Colored...
-
Rolling is a non-chip processing
Rolling is a non-chip processing...
-
roof tile machine, Roof Panel Roll Formin...
-
Automatic hydraulic system, the letter tile Parameters
Automatic hydraulic system, the letter ti...
- Double Layer Tile Roof Roll Forming M
- Wall Decoration Board Roll Forming Ma
-
Wall Panel Roll Forming Machine
time:2009-12-06 09:42from:未知 Author:admin click:Times
Wall Panel Roll Forming Machine Machine's components: Roll forming machine consists of uncoiler, coil sheet guiding device, main roll forming system, cutting device, Hydraulic station, PLC control system and support table.
1 Suitable material:
Color steel sheet or galvanized steel sheet
2. Thickness of raw material: 0.4_0.7mm
3. Yield strength of material: 235Mpa-345Mpa
4. Forming speed: About 15m/min
5. Power Requirement
Main motor power: 5.5Kw(Depend on final design)
Hydraulic station power: 2.2Kw (Depend on final design)
6. Uncoiler's loading capacity
Max. Capacity: 5000kgs(can be increased to be 10T)
7. Controlling system: Mitsubishi PLC & converter
8. Machine's size: About 20m*1.5m*1.4m (Depend on final design)
9. Machine with CE certificate.
------ line --------------------------