forming machine

Glazed tile machine press used

Glass tile press machine is divided into three parts, roll forming section, pressure-type parts, cutter part. Roller forming part of the drag from the motor, the roller chain drive rotation. Pressed in part driven hydraulic cylinder mold moves up and down, color-coated steel can be pressed into many sections, the shape of glazed tiles. Cutter part of the hydraulic cylinder driven cutter moves up and down, you can put colored steel waqen off. Glazed tile machine pressing production process is as follows: color steel plate into the roll forming section, forming part of the post-profiling, the pressure into an equidistant one, the cutter is responsible for fixed-length cut.
   Glazed tile machine control introduction Roll forming machine
   The operative part of a inverter-driven motor, hydraulic station motor, cutter, two hydraulic solenoid valves.
   Glazed tile machine test parts are: detection of color steel tile length of the pulse encoder, the upper and lower-pressure limit switch, the upper and lower cutter limit switch, pressure-type button on the upper and lower operation, the upper and lower cutter trip button, emergency stop switch, hydraulic Kai stop switch and so on.