The flying saw punching machine with automatic, easy operation and so on. Pressure-watt machine C of the C-beam equipment, rolling steel product has a good compression performance, stretch bending flatness is good, automatic fixed-length cutting, automatic punching, high degree of automation, the installation fast and convenient, the product can be used as medium-sized industrial civil the main force structures, such as factories, Equipment required to use an upper die mold and six under the Roll forming machine  same standard size mold, the first installation mode and one under the mold, mold directly under the wheel is installed in the six-party table, on the model installed in the slide at the end of the surface, and placed the appropriate thickness of plate to ensure that the upper and lower mold clamping, the four peripheral gap is even, the distance between the upper and lower die is equal to the thickness forming machine  required for tile blanks. And then subject to the above model, transposition table, install the remaining five under the die to pay, all installed in order to drive to the upper and lower mold after the pressure watts.