1, T-type keel hanging pieces: for T-type main keel and the boom connection. Only applies to non-light steel keel machine no additional load of the ceiling.
2, T-type keel joints: for the vertical T-type keel keel that is the main connection.
3, U-type keel hanging pieces: for connecting the keel and the boom load.
4, T-type keel pendant: for U-type light steel keel machine with the T-longitudinal keel connection.
5, U-type main keel joints: for the U-bearing keel take longer.
Pressure-watt machine the connection between the keel: boom by pulling on the explosive bolts fixed to the floor after the hanging pieces of the keel with the T-connection T-type main keel, T-type keel For lengthening, at its interface with the T-type keel at Connector fixed, plays the main keel keel connection between the plug, it may not accessories. If the ceiling has additional load, or a large area of the ceiling, you need to U-bearing keel, that is installed after the boom, first with the U-bearing keel hanging pieces of the U-connect the main keel and boom, and then T-keel pendant the T-longitudinal keel with U-connect the main keel.
Pressure-watt machine is wet when the production of glazed tile is used to vacuum screw extruder after the extrusion and cutting of rough precise shape to suppress tile billet hydraulic presses. The rise of the construction industry is inseparable from the construction machinery, most of which is the color-coated steel tile equipment, colored steel equipment, color-coated steel tile forming machine, purlin forming machine, floor load-bearing equipment, automatic press-watt machine device. Installation of equipment before the equipment provided by manufacturers installed base map, do Concrete foundation, and make a press to install the framework (channel steel welded pieces) will be placed in a completely cured on the basis of the mixed mud-kyu, a good framework for the level of school , Shang Hao ground screw secondary grouting to be completely cured before they can install the press. Automatic pressure-watt machine can be installed separately to use, but need to manually install billet, billet unloading can configure automatic loading and unloading aircraft billet mechanical hand with the extruder, ceva machine, send blank machines and conveyor lines, and the composition of tile Vaahto billet production line, all without manual operation. This machine mainly by the left and right body, the bottom of the connecting rod, the top chassis cover, sliding seat, six-wheel, pulley, gear mechanism, geneva mechanism, cam mechanism, lubrication pumps, hydraulic system, electric control part of the so on.