A mechanical press for routine maintenance projects, where the most important? The answer is the operator. That operator is the key to maintaining tile mechanical press. All maintenance and issue press search to start at the operator, the operator presses often can discover problems early to prevent parts of the press produced a significant, sustained damage. The operator can press attention given by the strange sound; any abnormal temperature, smoke, some portion of the debris or metal particles; and pipeline leakage problems found. Operators should ask ourselves every day problems, by checking the answer after the recording, so as to maintain long-term maintenance of records. 

Good on the press operator training in general, inappropriate operation or stamping press die set-style lead to press the leading cause of damage and downtime. Appropriate training and stamping die press operator can set the correct procedures to ensure that they operate. This will quickly reduce downtime. Safety during maintenance to ensure proper locking / opening process to ensure the safety of maintenance staff to ensure that the conduct of brake maintenance schedule put before the bottom of the sleeve. If you do, do not need to lock the sleeve on the. For press operators to maintain the process. To press operators to maintain the course of the press to make them when problems arise at any time to remind the maintenance or management. They carried out daily press operations, and therefore easier to hear or see signs of problems. As a daily driver with a car, you can note the first time an unusual sound, which is the same for the operator. 

Environmental control workshop presses make a clean operation or maintenance personnel can quickly discover when problems occur. Such as oil spills, leakage, breakage, etc., if the press is clean, it can be very simple to find out the location. Electrical work will be left to the professionals associated solved, but should check the control lamp is normal. Only qualified electrical technicians to electrical line maintenance for the press, but you can still press the control panel, check whether the normal light bulb, each class must ensure that the light bulb in the work, and properly carried out by the press Xianshi kinds of operating conditions. 

Ensure that the press is in equilibrium position can be a delicate balance and press work better, so best to check once a year. Find dry air leaks water side by side 

Pneumatic air brake system charged with the operation and balance system, need to check whether there are gas leaks, because the Department of the appropriate brake and air pressure can affect the balance of system performance, and they control the press stop time, if there are problems will make operation and equipment in danger. In addition, all the pneumatic systems have regulators, lubricators and reservoirs. Accumulation in the gas pipeline in the water, should be ruled out every day. Oil and filter change intervals on the press lubrication system is also improper maintenance downtime occurred one of the main press, for some reason, many press operators equipped with a filter in the fuel cycle system in operation from time to time replace the filters. Should ensure that their oil changed at the same time in replacement of filters, usually also need frequent replacement.