Glazed tile through successive development, has formed a rich variety, type system, pay attention, the assembly of strong products, commonly used in ordinary tiles are: Tongwa, Slate, sentence the first tile, dripping watts, Luo pan tile, bow W, animals, pick angle, is kiss, kiss joint angle, vertical animal, money, animals, ding, and so on. Evolved from the traditional Western-style glazed tile glazed tile first in Japan and Spain, Italy and other European countries applied, it will Tongwa, Slate-type system into one,Roll former reasonable structure, mounted simple, effective coverage area, roof bearing small. Over 100 kinds of rich glaze over at the same time, it does not lead glazed tile glazed decorative effect of lead on counter-phenomenon. Thus, Western-style tiles in the modern architecture has been more widely used. 

Glazed tile forming method, generally made by extrusion-type, hand-printed blanks, slip casting and other methods. Western-style tile with plastic molding. 

1. Extrusion molding: the ordinary glazed tile pieces Tongwa, Slate made by extrusion type, extrusion billet machine (TCL350 vacuum extruder) machine in the mix mud mud I install a green body of the same size head, to be blank After extrusion, steel cut wire into the tiles and let stand to dry, repair blank, dry firing. Roll forming machine

2. Hand-forming and slip casting 

Glazed tiles in the hook head, dripping tiles and the beast, head of a nail, flower window and are kissing, animals and other vertical structures formed by hand or slip casting. Manual assembly is to tap into the blank mud cake, in the plaster mold stamping out a pattern of green body, slightly dry paste from rising billet pick, will face finishing polish. 

3, plastic molding 

Western-style glazed tiles mainly plastic molding, by vacuum mud training machine, after extrusion and cut into rough blanks, then the pressure of tile with mold machine fine shape compression good system.