Recently, the German Depot developed a new type of chain model pressure-watt machine. This chain pattern tile machine mold pressure is standard mode, type of mold can replace the other tiles, so that press has become more flexible. In order to reduce the cost of such a press, each line of chain model first used by Hubert number can fill less than usual. 10 filling heads can be installed with 20 filling mode pits mold chain, beginning with four filling heads can be. Press longer blanks later update available for the modern high-production equipment, it would be more ideal. The smaller the company to provide ooze existing Extrusion brick tile brick pressing machine, to improve the ooze brick production. Roll forming 

Pressure tile machine mainly the left and right body, the bottom of the rod, the top chassis cover, sliding seat, six-wheel, pulley, gears, geneva mechanism, cam mechanism, lubrication pump, oil system, electric control parts etc. . Tile machine can not extract the structure and performance and operating rules shall not start the machine. Forbidden to work Slip ring more than the minimum shut height, that the sliding surface to the bottom of the surface work required minimum distance of 290 mm after the upper and lower mold clamping height with up and down the tiles with the thickness of heavy-bottomed plate, does not allow more than 290 mm, manufacturing mold this request should be designed to avoid machine accident. Often observe, sliding oil tank and the height of both sides of the body. Equipment should always be clean, clean, and not to have muddy water. 

Tile machine die stamping press process: from the motor through the pulley to drive the input shaft, through a small gear, large gear to drive the shaft, driven by a cam on the model with the sliding seat moves up and down, to achieve pressure watts. 

The transposition table is mounted on the shaft head gear, transmission gear sales call, toggle wheel mounted on six wheels to achieve trough axis indexing positioning on the shaft in each end with a mounted on the same axis and to suppress the back conjugate cam cam, rod and positioning by positioning the plate under the mold in the working position to achieve precise positioning. The left and right sides of the chassis, install a lubrication pump, after the machine work, pipeline transport oil to the rubbing parts