Shears the surrounding environment must be dry clean and tid
time:2010-07-23 17:02from:未知
Author:admin click:Times
Shears the surrounding environment must be dry clean and tidy
Shearer's use of the environment
1. Shears the surrounding environment must be dry clean and tidy, no stacking of materials, more than expected, the waste must be promptly cleaned up.
2. The power connection and distribution boxes should be fastened securely wiring and regularly by the electrical maintenance, to ensure that equipment is kept in good condition, and hang tags intact equipment.
3. Foot switch should be placed in the appropriate position and can not hit, opening and operation to maintain the same switch, foot switch guard to be intact, allowed no guard in the foot switch.
4. To be familiar with the basic parameters of shears, shear shall not be thick, wide, super. Each shearing operation must be adjusted according to the blade thickness and gap.
5. Must be familiar with equipment before use instructions, support grip equipment performance, and structural features.
6. Shears to regular inspection by the hand, maintenance, lubrication system to keep them open, filling the appropriate lubricant. Observe the hydraulic pump, control valve and pressure gauge working conditions, abnormal situation must stop repair.
7. Sharp edge should be checked regularly and found that with a blunt edge, should be replaced with another blade, or sharpen the blade thickness of the plane in time.
8. Pump suction mouth to comb filter should be inspected regularly cleaned, otherwise the pump will increase noise and impact the normal use of hydraulic systems.
9. Shearing operation is prohibited when the operator press a finger into the foot, or a knife in hand to avoid the crush.
10. Prohibited action shears the workpiece from the machine after the pick.
------ line --------------------------