C Shaped Purline Forming Machine-0212

C Shape Purline Forming Machine
INTRODUCTION

Type Pur line machine can produce many types of C-shaped purline. The whole line mainly consists of uncoiler and its base, coil sheet flattening equipment, punching equipment, pre-cutting equipment, C-shape forming system, hydraulic-and controlling system

MAIN TECHNICAL SPECIFICATION

Size: 8500mm * 1800mm * 1800mm
Total weight: about 13000KG
Controlling system: PLC
Main motor power: 15KW
Hydraulic station power: 15KW
Workingspeed:13000mm/min
Hydraulic pressure: 18~20mpa
Product range: All the types from 80 to 250

PRODUCT FEATURE AND USAGE
• All the rollers are forged from the high quality structural steel and areprocessed intensely. The surfaces of the rollers are plated with hard chromium, which lengthens the operating life of rollers.
• The computer controls the length, punching and counting.
• There are the flattening rollers at the front end of the machine, which are used for flattening the strip steel with poor flatness. After flattening, the product is smoothing and flattening and conforms to the standard, which increases the economic benefit.
• The C-shaped purlines formed by this machine have excellent anti-bending property and are easy to install. They are widely used as the supporter of roof and wall in large-scale and mid-scale construction, such as factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre, garden and so on.