Purlin Cold Roll Forming Machine_HKY Roll forming machine

Purlin cold roll forming machine can be used to produce different sizes of C or Z shape purlin after roller adjustment and cutting blade replacing. It mainly consists of uncoiler and its base, coil sheet guiding& adjusting device, roll formi

Option: hydraulic uncoiler and safety shield

Working flow:

uncoiling--sheet guiding& adjustment--roll forming--hole punching--post-cutting--run out table

Technical parameter:

Material spec: steel coil with yield stress of MPa 235 (33KSI)

Material thickness: 1.5-3.2mm

Forming speed: 10-14m/min

Main motor power: 15.5kw

Hydraulic power: 5.5kw

Passive uncoiler: max capacity 3000kgs

Roller stands: about 16 groups

Roller material: Cr12MoV (ASTM D2) mould steel with blacken treatment

Cutting blade material: Cr12MoV (ASTM D2) mould steel

Controlling system: Mitsubishi PLC

Main machine dimension: about 9000*1000*1300mm

Machine weight: about 8000kgs

Voltage: 380V, 3 Phases, 60Hz or according to customers requirement

------ line --------------------------

上一篇：roof panel roll forming machine,roll forming machinery
下一篇：floor decking roll forming machine