Contacts
TEL: (0086)-317-8267555
MOB: (86)-15131786129
FAX: (86)-317-8267570
Manager：Mr. Lu
E-mail: btxianfa@gmail.com
Automatic uncoiler & stacker
Product introduction:
Uncoiler is the specific machine for uncoil. There are three or four
rake fanning strip, connected by dovetail groove, installed on the
mandrel. In the end of the the fanning strip installed a radial
slide incase it moves to the shaft. But it can open and shrink along
the radial direction. The tail of the drum shaft connects to the
rotatable cylinder. The cylinder piston rod drives the forward
tetragonal shaft move along the shaft by the draw bar in the middle
on it. The fanning strip would be lead to open or shrink and add the
diameter of the coiling block
The rack of the uncoiler, drived by the hydraulic cylinder, is
movable on the leading rail of the base. To strengen the firm of the
coil, there are supporting arms installed in the head of the coil
block. With the coil on, the supporting arm would hold the head of
the coil. without the coil, the supporting arm would take back,
which would not influence the set of the coil.
This machine can make putting coil-stretch coil-deliver coil
automatically, the speed of which is same with the forming machine.
It is a matching machine for colored steel equipment. In order to
save human recourse and lower labor cost, it is better to work with
colored steel mould machine and stacker, with which it formed a
completely porducing line.
This machine is composed of feed main machine, small car device,
hydraulic station, CNC control system.
Main parameter:
1. Install size: 5100mm*1750mm*1700mm (5 tons)
2. The coil width: ≤1250 mm
3. Coil inside diameter: ￠480-￠510
4. Productivity: 1-20m/min
5. Main motor power: 3 KW
6. Hydraulic unit power: 3 KW
7. Electric control system: PLC vector inverter
8. Tolerate weight: max 5/10 tons
